Heritage Hemsby Recessed Thermostatic Shower Valve With Twin Stopcocks.
Specification
Size is - Width 165mm x Height 355mm
Manufactured using high quality brass
Fitted with ceramic disc valve
Suitable for all plumbing systems, preferably balanced
WRAS approved
Inlet hot water temperature must be at least 10% above the required blend temperature
Inlet Connection: 15mm compression elbows
Outlet Connection: 15mm compression
Minimum water pressure recommended for smooth working is 0.2 bar (LP-Low Pressure) and maximum is 5.0 bar (HP-High Pressure)
Flow Rate Open Outlet: 9 litres per minute from each stopcock (12.9 litres per minute from bottom outlet together)
Thermostatic
cartridge maintains showering temperature to +/- 1°C by compensating
for changes in the incoming water temperature and pressure giving the
stable outlet temperature
Swivel inlet elbows with 150mm centres, valve can be fed from top, bottom or rear
Feature automatic shut off in the event of hot or cold water supply failure, thus reducing the risk of scalding
Minimum cold water supply temperature is 5°C
Maximum hot water supply temperature is 80°C
Factory
set to a maximum of 42°C to eliminate the ability to select an unsafe
temperature - this is adjustable to suit user preference
Cartridge serviceable from front
Requires rear access to service the filters
For complete size details please refer technical drawing
For installation instructions, please download PDF
5 years of guarantee from the manufacturer against any manufacturing defects.